Engine Builds

At one time I planned to go into business building engines. I acquired most of the machinery, but the business part never got off the ground due to health problems. I've built a few engines a year as a hobby.

Chevrolet

  • Jay Klahr's 416 CID small block Chevrolet (2.3 Mb)
  • Joey Liberto's roller 383 (2.3 Mb)
  • Tommy Wilson's 383 Chevy Stroker (3 Mb)
  • My Un-LT1 350 (4.6 Mb)
  • Ron Melson's 350 rebuild (957 Kb)
  • John Barnett's 350 for 4WD (915 Kb)
  • Nick's 350 Chevy rebuild (152 Kb)
  • Joe Felix's Mercury Marine 350 (246 Kb)
  • Tommy Wilson's 283 Chevy stroker (1.5 Mb)
  • Kevin Williams' 311 "283 Stroker" (167 Kb)
  • Tommy Wilson's 283 Chevy rebuild (1.8 Mb)
  • My 2.5 Chevy fours (2 Mb)
  • How about an EFI intake converted to carburetor for the 311 above?

    Ford

  • John Miller's 520 Big Block Ford Stroker (1.4Mb)
  • John Miller's 3.6L Taurus SHO Stroker (1.9Mb)
  • David DeHaven's 460 Ford (1 Mb)
  • Dan Leih's 456 FE stroker (1 Mb)
  • Sean Korb's 443 FE Stroker (1.7 Mb)
  • Mark Petrelli's 438 Cleveland Stroker (1.6 Mb)
  • Kenney Moore's 434 Cleveland Stroker (1.4Mb)
  • Steve Grossen's 430 Windsor stroker (525 Kb)
  • Joe Weinstein's 410 Windsor Stroker (2 Mb)
  • Scott Bronson's 383 Windsor Stroker (470 Kb)
  • Pantera 379 Cleveland Stroker (4 Mb)
  • Sean Korb's 375 Windsor Stroker (140 Kb)
  • Mike Trusty's BOSS 351 (830 Kb)
  • Mark Bauer's "351X" Cleveland/Windsor hybrid (2.2 Mb)
  • Chuck Fry's 302-to-351 Stroker (542 Kb)
  • Kemper Porter's 315 Ford Mini-Stroker (620 Kb)
  • Tyrannosurus RX's Trick 302 (2.2 Mb)
  • Grassroots Motorsports Challenge 302 (1 Mb)
  • Ron Melson's 281 Windsor de-stroker (600 Kb)
  • Robert Harris' turbo flathead six (1 Mb)
  • My coated '71 Capri 2000 (313 Kb)

    Other

  • Bruce Plecan's Buick Grand National turbo V6 (3 Mb)

    Engine Overviews

  • The Ford Engine Pages
  • The Chevy Engine Pages
  • The Pontiac Pages (268 Kb)

    Other Technical

    Other Ford Stuff
  • Ford Bellhousing Bolt Patterns
    Small Block Ford Stuff
  • SBF cooling system thread from Fordnatics
  • How To Build A 347 Or 355 Ford Stroker (text)
  • How-To-Do-It Pictures Of A 302 To 351 Stroker Crank (650Kb)
  • Balancing A 366 Stroker Crank (220Kb)
  • Internal Balancing A Forged 347 Stroker Crank(390Kb)
  • Small Block Ford Cylinder Head Specs
  • Small Block Ford Intake Manifold Specs
  • Small Block Ford Musings
  • Small Block Ford Pushrod Length
  • Victor 351W Intake Converted To EFI
  • Images of Ford engine stuff (thumbnailed)
  • Ford Distributor Gears - from Steve Grossen(566Kb)
  • 351W Oil Pan Baffles - from Steve Grossen(165Kb)
  • pin buttons for a BOSS 302(350Kb)
  • Fuel Surge Tank for Tyrannosaurus RX (253 Kb)
  • Kevin Williams' Bandit Header
  • Images of other engine stuff (thumbnailed)